Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Pearl Treatments

Collapse
X
Collapse
  •  

  • Pearl Treatments

    Pearl Treatments Defined

    Pearl treatments are defined as any action other than polishing which alters a pearl's appearance which may include:
    • irradiation
    • bleaching
    • heating
    • filling
    • waxing
    • drilling
    • cutting
    • faceting and
    • working

    Pearl Treatments just after Harvesting

    After harvest, most pearls are always processed in one way or another. This processing may be subtle or less so.

    South Seas, Tahitians and Cortez pearls are usually just washed and will undergo minor tumbling with waxed bamboo chips or coarse salt, and that will be the extent of the processing.
    Tahitian black pearl inside a Tumbler with Salt slush




    On the other hand, Akoya and freshwater pearls are routinely bleached and polished before sale.

    However, there are treatments that should be noted with cultured pearls that change the aesthetic qualities of the gem. These treatments should be disclosed -in most countries, by Law- by the seller.


    Different Pearl Treatments

    When a low-quality cultured pearl is cleaned and polished, and still does not have a good luster, the farmer is left with a few options:
    1. He can sell the pearl at a steep discount.
    2. He can dispose of the pearl.
    3. He may peel the nacre to sell it, then reuse the nucleus; or
    4. apply a treatment to the pearl that will change its appearance and increase its value.
    If the pearl is a good candidate for treatment, this is the most common and economically sensible approach for the farmer.

    There are three main treatments that low-quality pearls undergo:
    • Dyeing: The use of silver nitrate or other organic dyes to darken the nacre of the pearl.
    • Irradiation: The use of gamma rays to darken the nucleus of the pearl in akoya pearls and the nacre layers in freshwater.
    • Luster treatments: A pearl is can be given a thermal treatment by first being heated and then cooled, this is referred to as "maeshori". Another method is to apply a "coating" of lacquer to enhance its luster artificially. This method has gone out of fashion recently.

    More on Maeshori

    "Maeshori" It is a Japanese word that means "before (mae) treatment (shori)" or what we would call a Pre-Treatment.

    It is a treatment used on all akoya, freshwater and some South Sea. Maeshori treatments vary from factory to factory, but it tightens nacre crystals and pulls moisture out, which will enhance the pearl's luster; but it has the issue of turning the pearl's nacre brittle. In freshwater pearls that have been over-treated, the pearls will turn "chalky" in short order.


    Using Silver Nitrate to create "Black Pearls"

    Silver nitrate has been used for many decades to darken the appearance of pearls. The chemical penetrates the layers of nacre and has a chemical reaction with light and hydrogen sulfide gas to create a very dark, black color.

    If the farmer wishes to create colors other than black, he may also use organic or inorganic dyes to produce another color variation. This is a very popular treatment done to freshwater pearls, as the lower values give farmers more opportunity to experiment.

    Akoya pearls are also routinely "pinked" to enhance a more desirable rose overtone. This is done after drilling and bleaching have taken place, and then the pearls are placed in a solution with Aniline or other red dyes and left there until the color is absorbed through the drill hole.


    Irradiation as a Pearl Treatment

    Irradiation -by means of Gamma ray bombardment, using a Cobalt tube- has differing effects on freshwater and saltwater cultured pearls.

    The gamma rays do not affect the nacre of saltwater cultured pearls, but in fact darken the nucleus of the pearl. An irradiated saltwater pearl will look gray or blue colored. Why is this so? marine pearls do not contain Manganese, since salt makes it insoluble, and it is this element that is altered with this process. So, the color altering is done only on the nucleus.

    The nacre of freshwater pearls, on the other hand, when affected by gamma rays can become very dark. Some of these freshwater treated pearls will also have an intense metallic sheen and iridescent orient over their surface. Why? Manganese is freshwater soluble and ends up being a normal component in freshwater nacre.
    Irradiated freshwater pearls



    Using Coatings in Pearls

    Coating a pearl to enhance its luster is not widely practiced and is greatly frowned upon. This coating is equivalent to a coat of clear nail polish. Although the luster may appear to be fine, the coating may eventually chip or peel, leaving a low-luster pearl visible beneath the surface.

    This is a treatment to watch for, as dishonest pearl dealers have passed these pearls on to unsuspecting consumers in the past.


    How to Detect Pearl Treatments

    Although nearly all pearls on the market today have been treated in some way, it can be difficult to detect pearls treated to change color.

    One method of detecting dyed or irradiated pearls is to check the matching of the strand. A strand of natural color pearls will typically vary slightly from pearl to pearl. A perfectly consistent strand may be evidence of treatment.

    By peering down the drill hole of a dyed pearl, one may also be able to see concentrations of color. This residue is left from the dying process.

    When looking down the drill hole of an irradiated pearl, one may be able to detect a darkened nucleus. This is strong evidence of gamma-ray treatment.

    Another -easy method- is by just looking at the pearls and detecting their clearly unnatural coloration: lemon-green, pink-red, cobalt-blue pearls are not normal colors!
    Artificially colored freshwater pearls of unnatural colors.




    How to Detect Luster Treatments

    Luster treatments are much harder to spot. The most basic method, however, is to compare an untreated strand with the suspect strand under at least 50X magnification.

    The untreated pearl will have a scaly nacre surface. The coated pearl will have a smooth, glass-like surface.



    Related Articles and Forum Threads:

    Last edited by CortezPearls; 03-26-2021, 12:31 AM.
      Posting comments is disabled.

    Categories

    Collapse

    article_tags

    Collapse

    There are no tags yet.

    Latest Articles

    Collapse

    • DIY Project: Make your very own Pearls in Half!
      by CortezPearls
      You have probably seen those photos of beautiful pearls that have been "cut in half" so you can see their inner structure, and you probably wondered how those are worked: are they sawed off? maybe a machete?


      Well, wonder no more! This little video explains in detail how you can make your very own, very nice...pearls in half.

      You will need:
      1. Sandpaper sheets, one of each: 60 (very rough), 80 (medium grit) and 220 (fine grit, also called "water
      ...
      10-26-2021, 07:30 PM
    • Pearls in the Web of Life - Part 2
      by CortezPearls
      In a sense, pearl oysters might be a “small ecosystem” of their own, a self-contained biome where a tug of war ensues and leads to eventual stability. But why does this happen? And does it hurt the mollusk? One of my Marine Biology teachers -Dr Fernando Manrique, a friend of Jacques Cousteau- once told us that the Ocean was teeming with Life, and that the hardest thing for many lifeforms to find was an “available apartment”, a place to settle and that would help them avoid being tossed...
      10-11-2021, 05:12 PM
    • Mabe Pearl Grading - 7) Dome Height
      by CortezPearls
      Part of the beauty of a Mabe pearl comes from its “dome” (height). When a Mabe pearl displays a low dome it most closely resembles a piece of mother-of-pearl shell than an actual pearl. Unfortunately, many Mabe pearls today are grown too flat, due to the intrinsic characteristic of the host shell: Pinctada shells are usually flatter than Pteria shells (the shells being much more concave) which does not allow for the use of tall implants, since these will touch the opposite shell and will cause the...
      08-23-2021, 11:20 PM
    • Mabe Pearl Grading - 6) Nacre Quality
      by CortezPearls
      The most important factor here is nacre thickness. Many Mabe are cultured for short periods of time (4 months) to obtain the most perfect shape, but at the expense of their nacre thickness and durability. On the other hand, there are producers that grown them for too long (over 12 months) and end up having pearls that have thick nacre, but their shapes are not standardized, and they may display one or more of the surface imperfections we discussed in the previous paragraph. There is usually a middle...
      08-23-2021, 03:47 PM
    • Grading Mabe Pearls -5) Surface Quality
      by CortezPearls
      As with other pearls, surface quality is an important attribute: the cleaner the surface is, the more desirable the Mabe is and more valuable too. The usual surface imperfections found in these are:

      • Missing Nacre: whitish, bite shaped marks.
      • Spots, pinpricks: dark or light-colored pin-prick markings.
      • Rippled surface: these are markings caused by the growth of the abductor muscle on top of the blister pearl. This marking causes the appearance of wavy...
      08-23-2021, 03:30 PM
    • Grading Mabe Pearls - 4) Mabe Luster
      by CortezPearls
      Mabe pearls are not very known for their great luster, although many of these pearls may display amazing luster. Mabe usually display a more silky or subdued luster, especially in the Pinctada species and is most shiny in the Pteria species…but luster is usually enhanced by means of a final polishing, done with a high-speed cloth-wheel and a polishing compound, although much care must be taken to avoid excessive polishing that leads to heat and may ultimately damage the pearls by “burning”...
      08-23-2021, 03:26 PM
    Working...
    X