Hi everyone. I just had a question. How do you know what size a pearl's nucleus is? Does it matter if the pearl is 10 or 8mm? Do most cultured tahitian pearls get the same size nucleus, and if so what is that size?
Thanks,
-Steph
Hi everyone. I just had a question. How do you know what size a pearl's nucleus is? Does it matter if the pearl is 10 or 8mm? Do most cultured tahitian pearls get the same size nucleus, and if so what is that size?
Thanks,
-Steph
Hi Steph,
All pearls that have been exported legally will have at least 0.8mm on the nucleus on each side. I say "legally" because the numbers don't add up down here. It would appear that there are large numbers of pearls making their way to Honk Kong that have never seen our x-ray machine. My site www.kamokapearls has a pic of if you want to see it. This is all a bit frustrating for us farmers that are playing by the rules, x-raying all our pearls and paying the tax of $2.30USD a gram. Obviously the cheaters are not paying the tax either. I have even seen pearls in strands in websites mentioned on this forum that would not pass the initial visual inspection before the pearls get scanned. Sorry about the tyrade but sometimes it's hard to hold back on that one when it is constantly making things difficult for us fair-players. The cheaters can obviously sell lower and thus control more market shares.
To get back to your question, some pearls can even have up to 2 whole millimeters of thickness. Most are around or a little over 1mm.
Down here most farmers start with a 2.0bu (bu is Japanese measure that equates to about 3mm) which measures out to about 6mm. These are what you typically have in 8mm pearls.
The first graft operation usually spans between 2.0 and 2.9 bu with the majority for most farmers being 2.1 to 2.4.
Josh Humbert
Pearl farmer and Tahitian pearl farming consultant.
www.kamokapearls.com
FB: http://www.facebook.com/Kamokapearls
@KamokaJosh
Its nice to hear from a farmer and his thoughts. I dig the tyrade man.Originally Posted by Josh
Cheers
Thanks for the support Adam. I just noticed that I spelled Hong Kong, Honk Kong. I guess I should thank my subconscious for the support too.![]()
Josh Humbert
Pearl farmer and Tahitian pearl farming consultant.
www.kamokapearls.com
FB: http://www.facebook.com/Kamokapearls
@KamokaJosh
Josh: Passion for what one sees as inequalities brings about tirades. Passion is always a forgivable sin. But, getting back to the question, is the size of the pearl dependent upon the size of the nucleus?
Pretty Panda pic by nlerner on her U.S. excursion last year, San Diego Zoo.[/SIZE][/SIZE]
and upon the time in the water too.Originally Posted by knotty panda
Josh, I spoke with a friend from Tahiti recently. He told me that a lot of Tahitian pearls sold to Japanese and Chinese wholesalers (and probably others too) were re-processed (cleaned, polished, whatever they call it). Could that be an explanation for the thin nacre of some of the Tahitian pearls on the market?
very nice photos on your website btw!
I just had another look at your website. Can you tell us more about the MOP nuclei that you use? Is it specific to your farm? Are they from P. margaritifera shells?
This has nothing to do with pearls (and please excuse my curiosity): I suppose photovoltaic panels are common in the Tuamotu. How do the panels behave in this saline environment? And is Tenesol Polynesie the only company that builds these installations? (I'm working for a company in that industry, hence my interest).
Hi Steph,Originally Posted by tahitiangirl
Size of the MOP nucleus is proportional(usually) to the size of the cultured pearl. An 8mm cultured pearl will have a smaller MOP nucleus than a 10mm one. The bigger the nucleus, the more costly it is. The bigger the cultured pearl, the more costly it is. Nuclei come in all sorts of sizes, up to 21 mm(or has Paspaley broken that record already).
Slraep
21mm? What sort of monster would you put that into? Even with a P. max a technician would have an awful time getting that into the shell.
The largest that I saw on the Paspaley III was around 5 bu. I gave a 19 mm MOP bead to Paspaley while in Darwin. It was a monster bead from Josh. They were really impressed with the size.
Jeremy Shepherd
President and Founder
PearlParadise.com, Inc.
The PearlParadise.com YouTube Channel
PearlParadise.com on Flickr
PearlParadise.com on Facebook
Some of My Favorite Pearly Finds on Instagram
Ouch! The 21mm I saw was a composite of two halves of a sphere glued together. It was a company based in Denmark that was distributing them. They do exist!! The only company I could think of that would be able to use something like that is Paspaley. Maybe almost nobody is able to use them, but they do exist. I must admit you are right about what kind of monster mollusc that would have to fit into(the gonad, for heaven's sake).
I once asked, in one of the forum threads(can't remember which one) if Paspaley was using the huge glued composite MOP nuclei, but didn't get any answer. Someone was buying them if they were on the market, and this was a couple years ago.
Slraep
Last edited by Slraep; 10-10-2007 at 06:42 PM.
What's Paspaley's biggest pearl? 20-21-22mm? So they are using MOP bead nuclei that are way under 19mm? How way under? The 21mm cultured pearl stays in the water for how long? Two years? Their MOP bead is 16-17mm maybe? That's what, 4-5mm of nacre??? I've been curious about this.
Maybe the guys at Paspaley were impressed with the 19mm whole cut MOP bead, but they certainly know of the hemisherical composites that are bigger.
Slraep
Last edited by Slraep; 10-10-2007 at 06:40 PM.
What we saw was 2nd grafting, so they may use something bigger on the rare 3rd. But they were not using anything close to the 19 milli that I brought with me.
Jeremy Shepherd
President and Founder
PearlParadise.com, Inc.
The PearlParadise.com YouTube Channel
PearlParadise.com on Flickr
PearlParadise.com on Facebook
Some of My Favorite Pearly Finds on Instagram
4-5mm of total nacre would not be out of the ordinary at all, and they claim many of their pearls have more than 4mm per radius.Originally Posted by Slraep
I am not sure what their biggest round would be. The Paspaley pearl is not their biggest, just their best. But I have heard of rounds as large as 23mm.
Jeremy Shepherd
President and Founder
PearlParadise.com, Inc.
The PearlParadise.com YouTube Channel
PearlParadise.com on Flickr
PearlParadise.com on Facebook
Some of My Favorite Pearly Finds on Instagram
How long do the said Paspaley pearls stay in the water?
Slraep
About 2 years. The nacre deposition is faster/better than other shells.
Jeremy Shepherd
President and Founder
PearlParadise.com, Inc.
The PearlParadise.com YouTube Channel
PearlParadise.com on Flickr
PearlParadise.com on Facebook
Some of My Favorite Pearly Finds on Instagram