Results 1 to 14 of 14
  1. #1
    First-graft Pearl Senior Guide Member
    Join Date
    Dec 2015
    Location
    Texas
    Posts
    328

    Default Little Hole, Big Hole - What to do?

    So I'm finding that as with Thanksgiving dinner, in playing with pearls it's often the leftovers that are the most satisfying.

    I had 12 leftover light peacock Tahitian circled drops and 1 lovely WSS baroque. I thought I'd do a tin cup with them, but then saw some posts with Tahitians and akoya keshi that were scrumptious. And I actually had some akoya keshi in my stash! The only problem was that the holes in the Tahitians are close to 1mm and the ones in the keshi are tiny and won't take regular-sized Beader's Secret or needles. I tried stringing them on fine soft touch wire with silicone bumpers as spacers and liked the look but ran short of the bumpers. Ordered some more, but they were back ordered. Pattye to the rescue! I ordered some fine Beader's Secret and fine needles and could back knot the keshi if great care was taken.

    But what about the Tahitians? Knots slipped right into the holes. But now I had spacers, since I wasn't using wire! Very careful knotting with spacers guarding the holes did the trick!

    So now I have a lovely light companion piece to my pale peacock strand!

    Name:  IMG_2319.jpg
Views: 127
Size:  205.8 KB
    Name:  IMG_2318.jpg
Views: 120
Size:  176.3 KB
    Name:  IMG_2322.jpg
Views: 120
Size:  103.9 KB
    Name:  IMG_2317.JPG
Views: 135
Size:  120.2 KB
    Name:  IMG_2316.jpg
Views: 122
Size:  90.1 KB
    Thank you, lovely Beaders, for inspiration and resources!!!
    Last edited by Cicadalady; 08-12-2017 at 09:35 PM.

  2. #2
    Natural Pearl Senior Pearl-Guide.com Pearl Expert Sanippy's Avatar
    Join Date
    Mar 2015
    Location
    Melbourne, Australia
    Posts
    1,803

    Default

    Absolutely beautiful!! I love seeing all of your creations.

  3. #3
    First-graft Pearl Senior Guide Member asurazzy's Avatar
    Join Date
    May 2017
    Location
    Sydney
    Posts
    256

    Default

    Oohhh what a lovely necklace that is!!

  4. #4
    First-graft Pearl Senior Guide Member Lugana's Avatar
    Join Date
    Sep 2016
    Location
    Spain
    Posts
    275

    Default

    I love how you pair necklaces Cicadalady! Lots of pearls, but still light airy look great job!

  5. #5
    Pearl Journalist Senior Pearl-Guide.com Pearl Expert GemGeek's Avatar
    Join Date
    Sep 2006
    Location
    Oceanside, CA
    Posts
    8,892

    Default

    Congratulations on pulling it off! I love akoya keshi instead of chain. Looks great on you.
    GemGeek
    The World Is My Oyster!

  6. #6
    New Member
    Join Date
    Jun 2013
    Location
    Perth, Western Australia
    Posts
    16

    Default

    Looks great with the two strands together!

  7. #7
    Natural Pearl Senior Pearl-Guide.com Pearl Expert amti's Avatar
    Join Date
    May 2014
    Location
    Helen In Texas
    Posts
    1,313

    Default

    Oh, that's very sweet! Akoya keshi are on my wish list! Gotta get me some soon!!!

  8. #8
    Rare Pearl Senior Pearl-Guide.com Pearl Expert
    Join Date
    May 2015
    Location
    Orlando, Florida, USA
    Posts
    3,339

    Default

    Wowza, that looks great! What a great solution.

    I find, with weaving anyway, that I'm always my most creative when I have limited resources and have to figure out how to make it work.

  9. #9
    Professional Rethreader Senior Guide Member Bernadette's Avatar
    Join Date
    Mar 2006
    Location
    Melbourne, Australia
    Posts
    326

    Default

    What I do when I have a large hole pearl, I put a small holed pearl tight up to the large holed pearl and then continue knotting as normal.

  10. #10
    First-graft Pearl Senior Guide Member
    Join Date
    Dec 2015
    Location
    Texas
    Posts
    328

    Default

    Bernadette - such a simple solution! I'll try that next time - thank you!!!

  11. #11
    Museum Pearl Senior Pearl-Guide.com Pearl Expert JerseyPearl's Avatar
    Join Date
    Apr 2014
    Location
    New Jersey, of course!
    Posts
    5,215

    Default

    Ack, I missed this thread yesterday...those two are lovely together! And I've used that "trick" to make the larger holes work better. I've never tried, but I wonder what it would look like to tie the knot over the silicone bead bumper...hmmm.
    Etsy shop: OceansCove
    Instagram: OceansCove
    Facebook: Ocean's Cove Jewelry
    Amazon Handmade: Ocean's Cove
    Pinterest: OceansCove

  12. #12
    First-graft Pearl Senior Guide Member
    Join Date
    Dec 2015
    Location
    Texas
    Posts
    328

    Default

    I tried tying the knot over the bumper and got unsightly silicone bulges . The fine thread didn't cover the bulk of the bumper.

  13. #13
    Second-graft Pearl Senior Guide Member KaySD's Avatar
    Join Date
    Jun 2014
    Location
    Southern California
    Posts
    599

    Default

    Both necklaces look lovely on you, together and separate! The akoya keshi make a wonderful "chain" for the tin cup, and I love the alternating larger smaller pearls on the strand. What a creative use of leftovers.

  14. #14
    First-graft Pearl Senior Guide Member Katalin's Avatar
    Join Date
    Jun 2013
    Location
    Austria, Europe
    Posts
    283

    Default

    What a nice job! And the two necklaces look perfect together!

Similar Threads

  1. How to Plug a Drill Hole?
    By jmd in forum The Lowly Beaders' Club
    Replies: 39
    Last Post: 12-12-2016, 06:24 AM
  2. Hole aroud drilling
    By Oli in forum Akoya Pearls
    Replies: 16
    Last Post: 01-13-2016, 08:30 AM
  3. Fair feedback for this GSS pearl with messy drill hole!
    By maiakity in forum South Sea Pearls
    Replies: 55
    Last Post: 06-14-2013, 01:10 PM
  4. Standard drill hole size
    By Hanaleimom in forum The Lowly Beaders' Club
    Replies: 9
    Last Post: 09-09-2009, 12:18 AM
  5. YLI Button Hole Silk Thread
    By Serenity in forum The Lowly Beaders' Club
    Replies: 4
    Last Post: 05-07-2008, 02:13 AM