| It is the volume that you have to control. It takes a bit of practice, but if use use the right volume you should not have any problems.
When I am making them I point the post down at an angle and squeeze the vigor while pointing down at an angle. I guess the angles would best be expressed like this: \/ The amount is less than a drop. Much less than a drop. It should be just enough to form a miniature ball at the END of the post tip. If the glue goes into the cup you will have spillover.
While I am doing this, the pearl is on a stick-board, top down with the hole up. Carefully, while resting the side of my hand so it does not move, I post it in one move, directly in the center of the hole. Squeeze for a few seconds and it is done. |